Top 10 Best Exhaust For 351 Windsor 2022 [Reviews & Guide]

Last Update:

When you are looking for the Best Exhaust For 351 Windsor, you have no choice but to rely on the experts’ advise. We have analyzed total 51448 reviews available online for Exhaust For 351 Windsor and picked the 10 Finest and Best Exhaust For 351 Windsor for you. It was not easy to short list the ideal Exhaust For 351 Windsor from lots of products, but we've tried to make sure that you get only the Best Exhaust For 351 Windsor from our suggestions. Check our listings what is decked up only with the Top Exhaust For 351 Windsor.

Best Exhaust For 351 Windsor
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.

A list of 10 best Exhaust For 351 Windsor on the Market

You can trust our reviews for the exhaust for 351 windsor. We have worked hard to list the Best Exhaust For 351 Windsor to make it easier for you to choose the right one. We also ranked the selected top 10 exhaust for 351 windsor and rated them accordingly. Hope this article will help you to finalize your purchase decision of exhaust for 351 windsor.

Comparison Chart of Top 10 exhaust for 351 windsor

NoProductScoreAction
12 Barrel Carburetor Carb 2100 Carburetor 2150 Carburetor Compatible with Ford 289 302 351 Cu Jeep Engine F100 F250 F350 with Electric Choke Mounting Gasket - 302 carburetor by BOOTOP9.8Buy on Amazon
2FEL-PRO VS 13264 T Valve Cover Gasket Set9.4Buy on Amazon
3BBK 1511 1-5/8" Shorty Tuned Length Performance Exhaust Headers for Ford Mustang 351W - Chrome Finish8.8Buy on Amazon
4Dorman 03407B Exhaust Manifold Hardware Kit Compatible with Select Ford / Lincoln / Mercury Models8.8Buy on Amazon
5BBK Performance 1515 1-5/8" Shorty Tuned Length Performance Exhaust Headers for Ford Mustang 5.0L - Chrome Finish8.8Buy on Amazon
6NEW SOUTHWEST SPEED BLACK BLOCK HUGGER SHORTY STYLE HEADERS FOR SMALL BLOCK FORD 260-351 WINDSOR & GT40P V8 ENGINES8.6Buy on Amazon
7NEW SOUTHWEST SPEED BLACK LAKE STYLE HEADERS FOR SMALL BLOCK FORD 260-351 WINDSOR & GT40P V8 ENGINES8.6Buy on Amazon
8A-Team Performance Complete HEI Distributor 65K Coil 7500 RPM Compatible with Small Block Ford SBF 5.8 L 351W Windsor 8 Cylinder One Wire Installation Blue Cap8.6Buy on Amazon
9Remflex 3029 Exhaust Gasket for Ford V8 Engine8.4Buy on Amazon
10Ford Windsor Small-Block Performance HP1558: Modify and Build 302/5.0L ND 351W/5.8L Ford Small Blocks8.2Buy on Amazon

Table Of Content:

1. 2 Barrel Carburetor Carb 2100 Carburetor 2150 Carburetor Compatible with Ford 289 302 351 Cu Jeep Engine F100 F250 F350 with Electric Choke Mounting Gasket – 302 carburetor by BOOTOP

  • New Carburetor Two 2 Barrel Carburetor Carb 2100 2150 Compatible with Ford 289 302 351 Cu Jeep Engine with Electric Choke.
  • Works with Ford Mustang Engine 289 cu in (4.
  • Compatible with 1964-1978 Jeep Wagoneer 360 Cu 5.
  • This item is a brand new Carburetor.
  • 2 Barrel Carburetor for Ford F100/F250/F350 with 289 302 may also know as 2-Barrel Carburetor,F250 Carburetor,F350 Carburetor,F100 Carburetor,289 Carburetor,302 Carburetor,351 Carburetor,351 Carburetor 2 barrel,2100 carburetor,2150 carburetor,2100 Carb,2bbl carburetor,302 carb,carburetor 2 barrel f100,2100 A800 carburetor,1969 ford f-100 carburetor,1981 ford f 100 carburetor,A800 carburetor,289 2 barrel carburetor,1978 ford f350 carburetor,Jeep Wagoneer carburetor,Carburetor for 302 Ford.

2. FEL-PRO VS 13264 T Valve Cover Gasket Set

  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
  • STRONG AND DURABLE — Features molded rubber over a rigid carrier which resists high heat
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal.
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding.
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted.

3. BBK 1511 1-5/8″ Shorty Tuned Length Performance Exhaust Headers for Ford Mustang 351W – Chrome Finish

  • BBK is your Number One Aftermarket Performance Exhaust Brand in the USA – American Designed and Built.
  • BBK Exhaust is Built with CNC Mandrel Bent Tubing for 35% Increased Flow Over Stock to Add Horsepower and Improve Torque and Performance.
  • Aircraft Quality Construction, Heavy Gauge 1-5/8″ Tubing, 3/8″ Laser Cut Flanges, Large Bore Patented Designed Collectors and Custom Precision Hand and Robotic Welds for Long Lasting Quality.
  • Direct “Perfect” Fit Replacement Exhaust Includes All New Gaskets and Hardware and Offers Improved Performance and Sound Over Restrictive Stock Systems.
  • Bolt on 12-18 HP with these 351 Swap BBK Unequal Length Shorty Exhaust Headers Fit all 1986-1993 Ford Mustang 351W Applications – Custom Nickel Chrome Finish.

4. Dorman 03407B Exhaust Manifold Hardware Kit Compatible with Select Ford / Lincoln / Mercury Models

  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life.
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

5. BBK Performance 1515 1-5/8″ Shorty Tuned Length Performance Exhaust Headers for Ford Mustang 5.0L – Chrome Finish

  • Package quantity: 1
  • Product type: AUTO PART
  • Package dimensions: 51.308 cm x 23.368 cm x 27.177 cm
  • Country of Origin: United States

6. NEW SOUTHWEST SPEED BLACK BLOCK HUGGER SHORTY STYLE HEADERS FOR SMALL BLOCK FORD 260-351 WINDSOR & GT40P V8 ENGINES

  • Pair of Brand New Southwest Speed Flat Black Block Hugger Shorty Headers for Small Block Ford 260-351ci Windsor and GT40P Engines (SWS Part # 440-2499) | * This Pair of Southwest Speed Block Hugger Shorty Headers are great for close or tight fit applications | * They will work for installing Small Block Ford Engines in many different applications and are great for engine swaps where a specifically designed header is not available.
  • Features 1-5/8″ tubes with 2-1/2″ collectors, complete with header bolts and gaskets and reducer bolts and gaskets | * These headers are Ground parallel with .
  • Features: | * Ideal for Engine Swaps | * Great for street rods | * Tightest fitting and most compact header we sell | * Great choice to replace stock cast iron exhaust manifolds | * More Performance | * Better fuel mileage | * 1-5/8″ tubes with 2-1/2″ collectors | * Includes a pair of 2-1/2″ to 2-1/4″ reducers | * Includes header bolts and gaskets and reducer bolts and gaskets | * Painted Flat Black to resist early corrosion.
  • Applications: | * C.
  • Paint Warning: | * These headers are painted with a high heat dull black paint | * It will generally dull even more when the engine is started | * The header paint will smoke and let off an odor the first few times the engine is up to temperature and the black finish will become duller turning closer to gray in color | * If exhaust temperatures are extreme at start the paint will blister and peel | * There is no warranty on header paint.

7. NEW SOUTHWEST SPEED BLACK LAKE STYLE HEADERS FOR SMALL BLOCK FORD 260-351 WINDSOR & GT40P V8 ENGINES

  • Pair of Brand New Southwest Speed Flat Black Lake Style Headers for Small Block Ford 260-351ci Windsor Engines (SWS Part # 440-2491).
  • This Pair of Southwest Speed Lake Style Headers are great for Hot Rods, Street Rods, Rat Rods and Nostalgia Rods, and are hotter than ever Nothing gives your vintage rod that authentic dry lakes competition look like a set of lake style headers | * Originally designed to blow across the salt flats of Bonneville, these exposed small block Ford headers work great on rods without hoods, but are often used with side skirts trimmed up to fit around the headers | * Each lake style header has a bottom exit flange so you can connect it to a muffled under-car exhaust when the end plate is on | * Unbolting and removing the end caps, delivers the true horsepower and sound of the small block Ford Windsor and GT40P engine | * Features 1-5/8″ primary tubes merging to the 3-1/2″ mega-phone collectors, complete with header bolts and gaskets, reducer bolts and gaskets, and end cap bolts and gaskets | * Ground parallel with .
  • Features: | * 1-5/8″ primaries to the 3-1/2″ mega-phone collector | * Includes 2-1/2″ reducers to connect exhaust under the vehicle | * Removable end plates allow you to run open headers with ease | * Great for Hot Rods, Street Rods, Rat Rods, and any Nostalgia Rod | * More Performance | * Better Fuel Mileage | * Nice Choice to replace cast iron exhaust manifolds | * Enhances the looks of any rod | * Includes gaskets and mounting hardware | * Painted Flat Black to resist early corrosion.
  • Applications: | * Fits all small block Ford V-8 engines with standard exhaust pattern | * Fits 260, 289, 302, 351W, and Ford GT40P).
  • Paint Warning: | * These headers are painted with a high heat dull black paint | * It will generally dull even more when the engine is started | * The header paint will smoke and let off an odor the first few times the engine is up to temperature and the black finish will become duller turning closer to gray in color | * If exhaust temperatures are extreme at start the paint will blister and peel | * There is no warranty on header paint.

8. A-Team Performance Complete HEI Distributor 65K Coil 7500 RPM Compatible with Small Block Ford SBF 5.8 L 351W Windsor 8 Cylinder One Wire Installation Blue Cap

  • Heavy Duty- With high grade hardened steel gears, utilizing the 4-pin ignition
  • OE+ Durability – Manufactured by certified OE distributor manufacturer
  • Coil Spark of 7,500 RPM – With high voltage of up to 65,000
  • Complete HEI Distributor – One Wire Installation, Blue cap
  • CNC Machined – Polished Aluminum shaft and a chrome-moly gear

9. Remflex 3029 Exhaust Gasket for Ford V8 Engine

  • 1-1/8 inch width x 1-1/2″ height Square Port; Ford V8 – 289-351 Windsor, (Ports Centered On Bolt Holes), Header Applications, 2/Set.
  • Ports are centered on the bolt holes
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

10. Ford Windsor Small-Block Performance HP1558: Modify and Build 302/5.0L ND 351W/5.8L Ford Small Blocks

Exhaust For 351 Windsor Buying Guide


Does the thought of finding a great Exhaust For 351 Windsor stress you out? Has your mind been juggling between choices when it comes to buying Exhaust For 351 Windsor in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Exhaust For 351 Windsor for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Exhaust For 351 Windsor Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Exhaust For 351 Windsor in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Exhaust For 351 Windsor currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t. Top Exhaust For 351 Windsor brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  2. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Exhaust For 351 Windsor based on that.
  3. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  4. Customer Ratings: The hundreds of customers using the Exhaust For 351 Windsor before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  5. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Exhaust For 351 Windsor they used.
  6. Seller Rank: Now, this is interesting! You don’t just need a good Exhaust For 351 Windsor, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  7. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Exhaust For 351 Windsor before putting them on the list.
  8. Durability: Durability and reliability go hand to hand. A robust and durable Exhaust For 351 Windsor will serve you for months and years to come.
  9. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Exhaust For 351 Windsor if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  10. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Exhaust For 351 Windsor on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Exhaust For 351 Windsor on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Exhaust For 351 Windsor featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Reply