Top 10 Best Bench Vise For Gunsmithing 2022 [Reviews & Guide]

Last Update:

When you are looking for the Best Bench Vise For Gunsmithing, you have no choice but to rely on the experts’ advise. We have analyzed total 43337 reviews available online for Bench Vise For Gunsmithing and picked the 10 Finest and Best Bench Vise For Gunsmithing for you. It was not easy to short list the ideal Bench Vise For Gunsmithing from lots of products, but we've tried to make sure that you get only the Best Bench Vise For Gunsmithing from our suggestions. Check our listings what is decked up only with the Top Bench Vise For Gunsmithing.

Best Bench Vise For Gunsmithing
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.

A list of 10 best Bench Vise For Gunsmithing on the Market

You can trust our reviews for the bench vise for gunsmithing. We have worked hard to list the Best Bench Vise For Gunsmithing to make it easier for you to choose the right one. We also ranked the selected top 10 bench vise for gunsmithing and rated them accordingly. Hope this article will help you to finalize your purchase decision of bench vise for gunsmithing.

Comparison Chart of Top 10 bench vise for gunsmithing

NoProductScoreAction
1JCL Vise Jaws - Nylon9.8Buy on Amazon
2Tipton Standing Ultra Gun Vise with Heavy-Duty Construction9.8Buy on Amazon
3Yost Tools 865-D2 Industrial Grade 6.5" Reversible Vise9.6Buy on Amazon
4HOPPE'S Gun Vise, Grey (HGV)9.2Buy on Amazon
5YOST VISES LV-4 Home Vise 4-1/2" (1 Pack)"9.2Buy on Amazon
6Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil (5", Ductile Iron)9Buy on Amazon
7Capri Tools 10518 Rotating Base and Head Bench Vise8.8Buy on Amazon
8Wilton 1765 6-1/2" Tradesman Vise8.8Buy on Amazon
9Yost Tools Vises 445 4.5" Heavy-Duty Utility Combination Pipe and Bench Vise8.8Buy on Amazon
10Wilton 550P Multi-Purpose Bench Vise8.4Buy on Amazon

Table Of Content:

1. JCL Vise Jaws – Nylon

  • Multipurpose Design: These 4″ nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise.
  • Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps.
  • Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface.
  • 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise.

2. Tipton Standing Ultra Gun Vise with Heavy-Duty Construction

  • DIMENSIONS: 35″ H x 54″ W x 30″ D Extended, 6.5″ H x 43″ W Collapsed and weighs 20 lbs
  • EASE OF USE: Oversized leg levers for effortless setup and collapses down for easy transport and storage, removing the need for a table or a bench.
  • VERSATILITY: The Ultra Gun Vise modules feature non-marring, glass-filled nylon clamps and removable accessory/tool trays that allow for an adjustable and customized setup.
  • DURABLE: With a lightweight, rigid, all-steel construction this portable bench is solid ensuring it is ready for all situations.
  • CONVENIENT: The 35-inch height creates optimal comfort while working and it features a built-in bottle opener.
  • GUARANTEED: This product is covered by a limited lifetime warranty provided by Tipton.

3. Yost Tools 865-D2 Industrial Grade 6.5″ Reversible Vise

  • Heavy Duty 60, 000 PSI Ductile Iron Castings
  • 6. 5” Wide Jaws
  • 7” Jaw Opening (11” when reversed)
  • 4” Throat Depth (3” when reversed)
  • 1/8” – 3. 5” Pipe Jaw Capacity
  • 360 degree swivel base
  • Gear type locking system with double lock down bolts
  • Two Anvils: Lower: 3. 4″ x 3. 6″ Upper: 6. 5″ x 2. 2″

4. HOPPE’S Gun Vise

  • Dual Lockable Sides for a secure, no scratch hold
  • Compartment for tools- stay organized while cleaning
  • Durable, constructed with chemical resistant polymer
  • Accessories not included – Gun Vise Only
  • Sport Type: Hunting

5. YOST VISES LV-4 Home Vise 4-1/2″ (1 Pack)”

  • Home Work Shop Vise, woodworking, assembly, general maintenance.
  • Jaw width: 4-1/2″ (11.4CM) x Jaw opening: 3″ (7.6CM) x Throat depth: 2.4″ (6.1CM)
  • Holds 0. 6″ D to 1. 85″ D pipes and tubes (1. 5CM x 4. 7CM)
  • 30, 000 PSI cast iron construction, blue power coat finish
  • Anvil: 1. 75” x 2” (4. 4CM x 5. 1CM)
  • Screw Diameter: 0. 6” (1. 5CM), Handle Diameter: 0. 4” (1CM) x Handle Length 6” (15. 2CM)
  • 240-Degree Swivel base allows rotating the vise for versatility
  • Swivel base features (4) mounting tabs
  • Product Dimensions and Shipping weight: 9.
  • Installation hardware not included: (4) bolts 3/8” x table thickness

6. Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head with Anvil (5″, Ductile Iron)

  • Jaw width:125mm(5″), Opening: 125mm(5″), Throat Depth: 67mm(2.
  • More Durable and Sturdy: Material updated, stationary body and floating body are all made from high strength ductile iron, PSI 60,000.
  • Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc.
  • Great for clamping and fixing workpiece: Higher clamping force; Longer opening; Bigger anvil; Deeper throat depth; Wider jaw; Round workpiece clamping; Microgroove tooth space for better grip; 360 degree swivel base providing unlimited clamping space.
  • Perfect Dual-Purpose Vises: This 5″ vise is suitable for both industrial and DIY home use.

7. Capri Tools 10518 Rotating Base and Head Bench Vise

  • Contains 5″ wide jaws, 4″ jaw opening, and 3.5″ throat depth
  • Made of heavy-duty ductile iron (60,000 psi) and boasts 6,600 lbs. of clamping force
  • Head rotates 360 degrees and can be locked in w/pull-pin at 12 set points, each within 30 degrees
  • Base rotates 360 degrees and makes it easy to place and lock jaws where needed

8. Wilton 1765 6-1/2″ Tradesman Vise

  • ENCLOSED DESIGN: Keeps lubrication in and contaminants out for a lifetime of smooth operation
  • REDESIGNED SPINDLE: Improves overall product life and durability
  • PRECISION SLIDE BAR: Eliminates movement in the front jaw regardless of opened distance
  • PREVENT MARRING: Reversible jaw inserts are serrated on one side for extra grip and smooth on the other to prevent marring on softer surfaces.
  • DURABILITY: Machined steel serrated jaws with phosphate coating provide increased durability and an extended life of use.

9. Yost Tools Vises 445 4.5″ Heavy-Duty Utility Combination Pipe and Bench Vise

  • Clamp force: 3, 150 lbs. and Torque rating: 73 Ft-Lb
  • Jaw Width: 4. 5″ x Jaw Opening: 4″ x Throat Depth: 2. 62″
  • Pipe Capacity: 1/8″ x 2″ Diameter, pipe jaws are cast-in place
  • 360-degree swivel base with (2) lock downs adjusts the direction of the jaws for proper placement
  • High-strength steel bar and 30, 000 psi cast iron vise components
  • Machined steel main screw with rolled threads
  • Replaceable Hardened Steel Serrated (Top) Jaws
  • 0. 43″D x 6. 5″Long handle with rubber bumpers
  • 2. 64″ x 2. 52″ pounding surface
  • Base mounting tabs: (4) x 7/16″D

10. Wilton 550P Multi-Purpose Bench Vise

  • QUICK SETUP: Indexed at 30 degree increments for quick set up
  • STRONG GRIP: Replaceable hardened steel jaws with a serrated pattern ensure grip and a long life
  • 360 DEGREE ROTATING HEAD: Can clamp material at any angle
  • PERFORMANCE: Has built-in pipe jaws and a V-jaw to easily hold round objects vertically

Bench Vise For Gunsmithing Buying Guide


Does the thought of finding a great Bench Vise For Gunsmithing stress you out? Has your mind been juggling between choices when it comes to buying Bench Vise For Gunsmithing in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Bench Vise For Gunsmithing for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Bench Vise For Gunsmithing Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Bench Vise For Gunsmithing in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Bench Vise For Gunsmithing currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t. Top Bench Vise For Gunsmithing brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  2. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Bench Vise For Gunsmithing based on that.
  3. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  4. Customer Ratings: The hundreds of customers using the Bench Vise For Gunsmithing before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  5. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Bench Vise For Gunsmithing they used.
  6. Seller Rank: Now, this is interesting! You don’t just need a good Bench Vise For Gunsmithing, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  7. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Bench Vise For Gunsmithing before putting them on the list.
  8. Durability: Durability and reliability go hand to hand. A robust and durable Bench Vise For Gunsmithing will serve you for months and years to come.
  9. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Bench Vise For Gunsmithing if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  10. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Bench Vise For Gunsmithing on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Bench Vise For Gunsmithing on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Bench Vise For Gunsmithing featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Reply